Dynapok SD 2/C Primer – JUNO – Paints manufacturers since 1927

Products

Dynapok SD 2/C Primer


100% solids 2-Pack epoxy primer for sealing, priming and waterproofing concrete floors.
Solvent-free formula.

Recommended as a primer on concrete floors or cementitious mortars.
Prevents premature deterioration of concrete and subsequent dust generation.
Seals, waterproofs and protects concrete floors from spills of various liquid types. Solvent free.
Excellent adhesion and chemical resistance.

Uso: Interior
Acabados
Gloss
Rendimiento
0,2-0,3 Kg/m² (subject to surface absorption)
Dilución
Thinner D-90
Limpieza
Thinner D-90
Repintado
Products without Thinners: Minimum 8 hours. Maximum 2 days.
Products with Thinners: Minimum 24 hours. Maximum 4 days
Sólidos en volumen
100%
Espesor
200 microns
Colores
  • Seals and consolidates concrete floors
  • Improves adhesion for subsequent coats
  • Provides uniform finish
  • Excellent chemical resistance.

Application by brush, short to medium nap roller/felt roller.
Stir paint thoroughly untill completely homogenized.
Apply on consistent, clean surfaces, free of efflorescence (saltpetre) and mould.
Avoid applying the product on wet surfaces.
MIXTURE PREPARATION.
Stir component A in its container and once homogenized add component B slowly to it , while performing mechanical stirring at low speed. Shake for 2 minutes until perfectly mixed. If necessary, pour mixture into a new container and stir again, to guarantee a homogenous well stirred mixture. Do not use the primer after it's indicated potlife of 30 minutes.
ENVIRONMENTAL CONDITIONS. See technical datasheet.
For more information consult TDS.